In the year 1968, Dick Couch (founder of Hypertherm) along with his colleague Bob Dean discovered a way to create a narrower plasma arc. This making it capable to cut metal quickly and more accurately than before. Fifty years later, the founding principle of customer-focused innovation continued with driving product development at Hypertherm.
ITWS has been associated with Hypertherm for past many years for KSA and has been officially appointed as distributor for UAE since 2017. ITWS deals in the complete product range of Hypertherm but primarily focusing on selling the Powermax Plasma Cutting Products series and the consumables for Powermax and HPR machines and torches.
Products
| Input voltages | 120-240 V, 1-PH, 50/60 Hz |
|---|---|
| Input current @ 2.5 kW | 120-240 V, 1-PH, 29-15 A |
| Output current | 15-30 A |
| Rated output voltage | 83 VDC |
| Duty cycle @ 40°C (104°F) | 35%, 240 V |
| 20%, 120 V | |
| Open circuit voltage (OCV) | 256 VDC |
| Dimensions with handles 420 mm | (16.5″) D; 195 mm (7.7″) W; 333 mm (13.1″) H |
| Weight w/ 4,5 m (15′) torch | 13.5 kg (29.8 lbs) |
| Input power cable length | 3 m (10′) |
| Power supply type | Inverter – IGBT |
| Engine drive requirement | 5.5 kW for full 30 A output |
| Certifications | CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. |
| Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty. |
| Input voltages(± 10%) | CSA | 200 – 240 V, 1-PH, 50-60 Hz |
|---|---|---|
| 480 V, 3-PH, 50-60 Hz1 | ||
| CE/CCC | 230 V, 1-PH, 50-60 Hz | |
| 400 V, 3-PH, 50-60 Hz | ||
| Input current @ 6.5 kW |
CSA | 200 – 240 V, 1-PH, 39/32 A |
| 480 V, 3-PH, 9.4 A1 | ||
| CE/CCC | 230 V, 1-PH, 33 A | |
| 400 V, 3-PH, 10 A | ||
| Output current | 10–45 A | |
| Rated output voltage | 145 VDC | |
| Duty cycle@ 40° C (104° F) | CSA | 50% @ 45 A, 200 – 240 V, 1-PH |
| 60% @ 41 A, 200 – 240 V, 1-PH | ||
| 100% @ 32 A, 200 – 240 V, 1-PH | ||
| 50% @ 45 A, 480 V, 3-PH | ||
| 60% @ 41 A, 480 V, 3-PH | ||
| 100% @ 32 A, 480 V, 3-PH | ||
| CE/CCC | 50% @ 45 A, 230 V, 1-PH | |
| 60% @ 41 A, 230 V, 1-PH | ||
| 100% @ 32 A, 230 V, 1-PH | ||
| 50% @ 45 A, 400 V, 3-PH | ||
| 60% @ 41 A, 400 V, 3-PH | ||
| 100% @ 32 A, 400 V, 3-PH | ||
| Open circuit voltage (OCV) | 275 VDC (200 – 240 V, CSA/CE/CCC and 480 V, CSA) | |
| 265 VDC (400 V CE/CCC) | ||
| Dimensions with handles | 442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H | |
| Weight with 6.1 m (20′) torch | CSA | 14 kg (31 lbs.) |
| CE/CCC | 15 kg (33 lbs.) | |
| Gas Supply | Cutting: air (clean, dry and oil-free), nitrogen, F5 | |
| Gouging: air (clean, dry and oil-free), nitrogen, F5 | ||
| Marking: air (clean dry and oil-free) argon | ||
| Power supply type | Inverter – IGBT | |
| Recommended gas inlet flow rate / pressure |
188 I/min (400 scfh) @ 5,9 bar (90 psi) | |
| Input power cable length | 3 m (10′) | |
| Power supply type | Inverter – IGBT | |
| Engine drive requirement | 12.5 kVA (10 kW) for full 45 A output | |
| Electrical efficiency | 88% | |
| Recyclability | 100% | |
| Certifications | CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. | |
| Warranty | Power supply: 3-year | |
| Input voltages | CSA | 200 – 480 V, 1-PH, 50/60 Hz |
|---|---|---|
| 200 – 600 V, 3-PH, 50/60 Hz | ||
| CE | 380/400 V, 3-PH, 50/60 Hz | |
| Input Current @ 9 kW | CSA | 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A |
| 200/208/240/480 V, 1-PH, 52/50/44/22 A | ||
| CE | 380/400 V, 3-PH, 15.5/15 A | |
| Output current | 20 – 65 A | |
| Rated output voltage | 139 VDC | |
| Duty cycle @ 40°C (104°F) | CSA | 50% @ 65 A, 230 – 600 V, 1/3-PH |
| 40% @ 65 A, 200 – 208 V, 1/3-PH | ||
| 100% @ 46 A, 230 – 600 V, 1/3-PH | ||
| CE | 50% @ 65 A, 380/400 V, 3-PH | |
| 100% @ 46 A, 380/400 V, 3-PH | ||
| Open circuit voltage (OCV) | CSA | 295 VDC |
| CE | 270 VDC | |
| Dimensions with handles | 500 mm (19.7″) D; 234 mm (9.2″) W | |
| 455 mm (17.9″) H | ||
| Weight with 6.1 m (20′) torch | CSA | 29 kg (64 lbs) |
| CE/CCC | 26 kg (57 lbs) | |
| Gas Supply | Cutting: air (clean, dry and oil-free), nitrogen, F5 | |
| Gouging: air (clean, dry and oil-free), nitrogen, F5 | ||
| Marking: air (clean dry and oil-free) argon | ||
| Power supply type | Clean, dry, oil-free air or nitrogen | |
| flow rate / pressure | Gouging: 450 scfh; 212 l/min (7.5 scfm) @ 70 psi (4.8 bar) | |
| Recommended gas inlet | Cutting: 189 l/min (400 scfh; 6.7 scfm) @ 85 psi (5.9 bar) | |
| Input power cable length | 3 m (10′) | |
| Power supply type | Inverter – IGBT | |
| Input voltages | CSA | 200 – 480 V, 1-PH, 50/60 Hz |
|---|---|---|
| 200 – 600 V, 3-PH, 50/60 Hz | ||
| CE | 380/400 V, 3-PH, 50/60 Hz | |
| Input Current @12.2 kW | CSA | 200/208/240/480 V, 1-PH, 70/68/58/29 A |
| 200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A | ||
| CE | 380/400 V, 3-PH, 20.5/19.5 A | |
| Output current | 25 – 85 A | |
| Rated output voltage | 143 VDC | |
| Duty cycle @ 40°C (104°F) | CSA | 60% @ 85 A, 230 – 600 V, 3-PH |
| 60% @ 85 A, 480 V, 1-PH | ||
| 50% @ 85 A, 240 V, 1-PH | ||
| 50% @ 85 A, 200 – 208 V, 3-PH | ||
| 40% @ 85 A, 200 – 208 V, 1-PH | ||
| 100% @ 66 A, 230 – 600 V, 1/3-PH | ||
| CE | 60% @ 85 A, 380/400 V, 3-PH | |
| 100% @ 66 A, 380/400 V, 3-PH | ||
| Open circuit voltage (OCV) | CSA | 305 VDC |
| CE | 270 VDC | |
| Dimensions with handles | 500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H | |
| Weight with 7.6 m ( 25′) torch | CSA | 32 kg (71 lbs) |
| CE | 28 kg (62 lbs) | |
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Recommended gas inlet | Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi) | |
| flow rate / pressure | Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi) | |
| Input power cable length | 3 m (10′) | |
| Power supply type | Inverter – IGBT | |
| Input voltages | CSA | 200-600 V, 3-PH, 50/60 Hz |
|---|---|---|
| CE | 400 V, 3-PH, 50/60 Hz | |
| 200-400 V, 3-PH, 50/60 Hz | ||
| CCC | 380 V, 3-PH, 50/60 Hz | |
| Input current @ 16.8 kW | 200/208/240/380/400/480/600 V, 58/56/49/28/25/22 A | |
| Output current | 30 – 105 A | |
| Rated output voltage | 160 VDC | |
| Duty cycle @ 40°C (104°F) | 80% @ 105 A | |
| Open circuit voltage (OCV) | 200-600 V CSA: 300 VDC | |
| 380 V CCC and 230-400 V CE: 288 VDC | ||
| 400 V CE: 292 VDC | ||
| Dimensions with handles | 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H) | |
| Weight with 7.6 m (25′) torch | 200-600 V CSA: 45 kg (100 lbs) | |
| 380 V CCC/400 V CE: 41 kg (90.4 lbs) | ||
| 230-400 V CE: 45 kg (100 lbs) | ||
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Power supply type | Inverter – IGBT | |
| Recommended gas inlet | Cutting: 217 l/min (460 scfh) @5.9 bar (85 psi) | |
| flow rate / pressure | Gouging: 227 l/min (480 scfh) @4.8 bar (70 psi) | |
| Input power cable length | 3 m (10′) * | |
| Power supply type | Inverter – IGBT | |
| Engine drive requirement | 30 kW for full 105 A output | |
| Certifications | CSA-certified for use in the Americas and Asia, except China. | |
| CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. | ||
| CCC for use in China. | ||
| Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty. | |
| Input voltages | CSA | 480/600 V, 3-PH, 50/60 Hz |
|---|---|---|
| CE | 400 V, 3-PH, 50/60 Hz | |
| CCC | 380 V, 3-PH, 50/60 Hz | |
| Input current @ 21.9 kW | 300/400/480/600 V, 38/36/31/24 A | |
| Output current | 30 – 125 A | |
| Rated output voltage | 175 VDC | |
| Duty cycle @ 40°C (104°F) | 100% @ 125 A | |
| Open circuit voltage (OCV) | 400/600 CSA: 320 VDC | |
| 380 V CCC: 290 VDC | ||
| 400 V CE: 305 VDC | ||
| Dimensions with handles | 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H) | |
| Weight with 7.6 m (25′) torch | 480 V, 47,9 kg (105.7 lbs) | |
| 600 V, 47,5 kg (104.7 lbs) | ||
| 380 V, 45,2 kg (99.6 lbs) | ||
| 400 V, 48,9 kg (107.8 lbs) | ||
| Gas Supply | Clean, dry, oil-free air or nitrogen | |
| Recommended gas inlet | Cutting: 260 l/min (550 scfh) @5.9 bar (85 psi) | |
| flow rate / pressure | Gouging: 212 l/min (450 scfh) @4.1 bar (60 psi) | |
| Input power cable length | 3 m (10′) * | |
| Power supply type | Inverter – IGBT | |
| Engine drive requirement | 40 kW for full 125 A output | |
| Certifications | CSA-certified for use in the Americas and Asia, except China. | |
| CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. | ||
| CCC for use in China. | ||
| Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty. | |
Duramax™ torches can give enhanced performance and productivity. Handheld and machine styles available. SpringStart™ electrode technology eliminates moving parts in the torch for more reliable arc-starting
A complete range of plasma consumables for Powermax Plasma Cutting Products and HPR is available. These Consumables & Spares are being imported from Hypertherm Factory in USA Or Netherlands and come in the original Hypertherm Packing.
Download Available
For Product base solutions, to know & try the products in our offerings, to call for Technical discussions with our Sales & Product Engineers.
